Tumaker Pro Dual
Direct Drive HR - Direct Drive HR

3D printer with double independent head Direct Drive HR – Direct Drive HR

Tumaker Pro Dual
Direct Drive HR - Direct Drive HR

We present the Tumaker Pro Dual 3D Printer with two independent Direct Drive HR – Direct Drive HR heads. Under the seal of quality that supports TUMAKER in all its products, this 3D printer takes reliability and efficiency to the next level. An innovation never seen before in 3D printing. With two Direct Drive HR heads, experience the best possible performance when it comes to filament 3D printing. Enabling efficient printing of flexible materials.

Direct Extrusion

The TUMAKER Pro Dual Direct Drive HR – Direct Drive HR with independent double head optimizes the intensive use of flexible materials.

“A different 3D printer with totally professional components”

Versatility and efficiency

The Tumaker Pro Dual Direct Drive HR – Direct Drive HR 3D Printer offers different printing possibilities:

  • Single head production: Prints with only one head, like a single extruder 3D printer.
  • Double head production: Produces a single piece using both heads. Alternating colors or materials for the manufacture of it. Being able to use soluble materials for the support.
  • Simultaneous production: Mirror printing, creates two pieces at the same time, one with each head of the Tumaker Pro Dual Direct Drive HR – Direct Drive HR.

Why choose Tumaker Pro Dual Direct Drive HR - Direct Drive HR 3D printer?

This 3D Printer has developments specially thought out and designed to facilitate its professional and industrial use.

  • Increase your productivity: Print two pieces simultaneously.
  • Eliminates risks: filament end sensor that pauses printing if it runs out of material and restarts the job where it left off.
  • Maximize your possibilities with flexible materials: HR head. Direct extrusion that ensures the best behavior with flexible filaments.
  • Work smoothly: 32-bit processor ensures stability and increases speed.
  • Take care of the work environment: movements controlled by that facilitate silent work, without the usual noise of 3D printing.
  • Optimize control: WIFI connectivity, SD card and 5” full color touch screen. Possibility of Ethernet connectivity.
  • Continuous and stable printing: calibration system that allows the printer to map the base once calibrated, so that it is automatically corrected during printing, without the need for manual adjustments.< /li>
  • Avoid incidents: by having an independent double head system, we avoid the incidents typical of the use of two materials in printers with in-line heads.
  • Improve your impressions: thanks to the use of professional SIMPLIFY 3D software. The Tumaker Pro Dual Direct Drive HR – Direct Drive HR is supplied with a perpetual license of the best professional software on the market.
  • Speed ​​up your work: printer base with extremely fast heating system.
  • Protection at work: security closure.
  • Wide variety of materials: ABS, Catamold 316L, PA6 + 30% GF, PLA, PCL, ASA, PETG, PC+PBT, PC, LDPE, PEKK, PP, PP + 30% CF, SEBS, Soft TPU Sh18A, PEI (Ultem), Ceramic Al2O3, PVC, ABS +CF, FLEXA 93, Wood, PA16 + Ferrite, PA12 + Neodymium, PP + Mineral filler, Grilon BK-30, PPC 7712, SAN, PC/ASA, PC +20% CF, PA66 + 30% GF.
  • Large print volume: up to 495 x 470 x 500 mm

Characteristics

SPECIFICATIONS

NX Pro Dual
Direct Drive HR + Direct Drive HR

BIGFOOT 200 Pro Dual
Direct Drive HR + Direct Drive HR

BIGFOOT 350 Pro Dual
Direct Drive HR + Direct Drive HR

BIGFOOT 500 Pro Dual
Direct Drive HR + Direct Drive HR

Build Volume

270x185x200 mm

495x470x200 mm

495x470x350 mm

495x470x500 mm

DUAL Printing

235x185x200 mm

475x470x200 mm

475x470x350 mm

475x470x350 mm

Mirror Printing

145x185x200 mm

250x470x200mm

250x470x350mm

250x470x500 mm

Independent Extruders

Yes

Yes

Yes

Yes

Packing Size

605x501x500 mm

1006x940x735 mm

1006x940x885 mm

1006x940x1035 mm

Gross Weight

32 kg

100 kg

120 kg

140 kg

Printer Size

550x440x410 mm

860x720x510 mm

860x720x660 mm

860x720x810 mm

Printer Weight

30 kg

68 kg

75 kg

82 kg

Optimized Materials

(ABS) - (Catamold 316L) - (PA6 + 30% GF) - (PLA) - (PCL) - (ASA) - (PETG) - (PC+PBT) - (PC) - (LDPE) - (PEKK) - (PP) - ( PP + 30% CF) - (SEBS) - (Soft TPU Sh18A) - (PEI Ultem) - (Ceramic Al2O3) - (PVC) - (ABS +CF) - (FLEXA 93) - (Wood) - (PA16 + Ferrite) - (PA12 + Neodymium) - (PP + Mineral filler) - (Grilon BK-30) - (PPC 7712) - (SAN) - (PC/ASA) - (PC +20% CF) - (PA66 + 30% GF).​

Nozzle Diameter (mm)

0.25 - 0.4 - 0.6 - 0.8 mm

0.25 - 0.4 - 0.6 - 0.8 mm

0.25 - 0.4 - 0.6 - 0.8 mm

0.25 - 0.4 - 0.6 - 0.8 mm

Layer Resolution

10μm

Maximum Layer Size

(0,25 nozzle: 0.16 mm) - (0,4 nozzle: 0,3 mm) - (0,6 nozzle: 0,48 mm) - (0,8 nozzle: 0.6 mm)

Extruder maximum temperature

300ºC

Nozzle Heating Time

20ºC: 200ºC - 1’15” / 250ºC -1’50” / 300ºC -2’35”

Build Plate Leveling

Automatic

Heated bed maximum temperature

100°C

Power

Energy Smart Management. Power Rating: 500W. Noise Level: 44 dB (closed door, 40dB)

Display

5"color touch screen. Control devices: PC, tablet, Smartphone. Control mode: Web

Software

Simplify3D Professional Software

Connectivity

Connected to network: Wifi, Micro SD Card, Ethernet (optional)

Warranty Period

1 Year Limited Warranty

Find your reseller
User manual
Technical Especs.
Support
Item added to cart.
0 items - 0,00 

Can we help you?

Contact our team of 3D printing specialists and they will help you with any questions regarding our products and services.
 

Responsible: INTERNATIONAL TECHNOLOGY 3D PRINTERS SL (IT3D)

Main purpose: Attending and answering communications or requests received.

Principal Legitimization: INTERNATIONAL TECHNOLOGY 3D PRINTERS SL’s legitimate interest in answering your questions.

Additional Purposes: Manage the sending of the newsletter or newsletter of INTERNATIONAL TECHNOLOGY 3D PRINTERS SL. You have the right to withdraw consent at any time. INTERNATIONAL TECHNOLOGY 3D PRINTERS SL.

Additional Legitimations: The treatment is based on the consent that is requested in the web form to that effect.

Recipients: Hosting services and computer consulting services.

International Transfers: No international data transfers are made outside the EU.

Rights: Access, rectify and delete the data, as well as other rights, as explained in the additional information.

Additional information: You can access detailed treatment information on our website: https://it3d.com/en/privacy-policy/

¿Podemos ayudarte?

Contacta con nuestro equipo de especialistas en impresión 3D y te ayudarán en cualquier duda referente a nuestros productos y servicios.

 

Responsible: INTERNATIONAL TECHNOLOGY 3D PRINTERS SL (IT3D)

Main purpose: Attending and answering communications or requests received.

Principal Legitimization: INTERNATIONAL TECHNOLOGY 3D PRINTERS SL’s legitimate interest in answering your questions.

Additional Purposes: Manage the sending of the newsletter or newsletter of INTERNATIONAL TECHNOLOGY 3D PRINTERS SL. You have the right to withdraw consent at any time. INTERNATIONAL TECHNOLOGY 3D PRINTERS SL.

Additional Legitimations: The treatment is based on the consent that is requested in the web form to that effect.

Recipients: Hosting services and computer consulting services.

International Transfers: No international data transfers are made outside the EU.

Rights: Access, rectify and delete the data, as well as other rights, as explained in the additional information.

Additional information: You can access detailed treatment information on our website: https://it3d.com/en/privacy-policy/